MoldMaking Technology

JUL 2018

Advertising in MoldMaking Technology offers

Issue link: https://mmt.epubxp.com/i/995639

Contents of this Issue

Navigation

Page 61 of 123

Pg. 5 Mold Components Mold Components 60 MoldMaking Technology —— JULY 2018 Pages 45 to 60 How to Advance Molding Undercuts By Garry Zydron Collapsible cores have long been touted as a viable alternative for molding undercut details like internal threads as opposed to using traditional unscrewing mechanisms like racks and gears. Several potential benefits result from using collaps- ible cores, not the least of which is eliminating the messy unscrewing cores, and yet it can be difficult convincing a moldmaker or a molder to use the technology. A new flush- style core design just might help to overcome objections and advance the molding of undercuts. Here are seven good reasons to consider this new technology: • Durability. The most common objection is that the cores do not have the durability to last three million cycles. In some cases, this might be true, but the patented flush-style core has succeeded in attaining eight to 10 million cycles. For example, flush-style cores were used for a 24-cavity tool molding a wine cap measuring 30 millimeters by 40 millimeters. The cap's wall thickness reduces to 0.25 millimeters for the tear-off strip. There are pin shut-offs on both sides of the core, and the slides shut off on the core, which shapes the bot- tom of the cap. The mold ran for eight years and averaged between one million and five million cycles per year. • Radius positioning. This project was successful because unlike other styles of collapsible cores, the radius on a flush-style core (located on its pin) is positioned internally versus at the core's tip. This is so that the pin's top surface is flush with the core's top, enabling the part to be designed with a consistent wall thickness. • Ring design. Also unique is that the inner and outer fingers of the flush-style cores are positioned on two separate rings versus one. Wire EDM improves the fit between the fingers, and all the fingers open independently so that the sides of the fingers do not wear. • Core assembly. The core assembly uses straight, true diam- eters, further improving the fit and core durability and accuracy. These true diameters act like a pin and bushing with almost no wear. • Core fit. Working without tapered-fit surfaces makes it easier to fit the core into the mold. A straight pin ensures that the core is open to the proper molding position, so the molded part shows only a witness line and no flash. This new fit also improves thermal transfer by fitting a true diameter. • Cost and cycle time. A collapsible core design can help mold parts with undercut details at one-third the cost of an unscrewing mold and half the cycle time. It is no longer necessary to design in a rack mechanism because there is no need for it. This is because of the cost reduction coupled with a simpler mold design. The notably faster cycle time is achieved because there is no unscrewing of the part. • Footprint. A final point to consider is that collapsible cores have very small footprints, which means that the designer can position more parts in the same size mold or the same number of parts in a smaller mold using a smaller press. When compared to an unscrewing mold, the difference is dramatic, as cavitation can be increased by a third or even half again as much in the same size mold. CONTRIBUTOR Garry Zydron is the president of Collapsible Core Inc. A new flush-style core design just might help to overcome objections and advance the molding of undercuts. Image courtesy of Collapsible Core Inc. These wine caps were molded for eight years at a volume between one million and five million cycles per year using the original patented, flush-style collapsible cores. FOR MORE INFORMATION Collapsible Core Inc. / 630-408-1693 / collapsiblecore.com

Articles in this issue

Links on this page

Archives of this issue

view archives of MoldMaking Technology - JUL 2018